Brake Pad Rear Chevrolet Epica 2004/2006

Part Number : PGD1030C

Product Line : Raybestos
Part Description : Disc Brake Pad Set
Material : Ceramic 
Pad Assembly Thickness, Inner Overall : 5.080 mm
Pad Assembly Thickness, Outer Overall : 5.080 mm
Plate Height, Inner : 38.608 mm
Plate Height, Outer : 38.608 mm
Plate Length, Inner : 120.904 mm
Plate Length, Outer : 120.904 mm
Packaged Weight : 0.812 kg
Country of Origin : Mexico

?WHAT HAPPENS WHEN BRAKE PADS WEAR DOWN
  Every time you engage your vehicle"s brakes, you are causing 
minute amounts of wear and tear on your brake pad. For each type of 
brake pads, ceramic, organic, and metallic, this friction causes small 
amounts of protective coating to wear away from the brake pad, Over 
time, this deterioration starts to add up: as your brake pads becomes 
thinner and thinner, they will eventually get to the point where they should 
be replaced. Here are some signs to look for to know when to replace 
brake pads:
1 - SQUEALING OR SCREECHING NOISES
Generally, the first indication any driver will notice is a squealing, 
screeching, or whining noise when the brakes are engaged. This sound is 
caused by a small, metallic shim indicator that"s embedded in your break 
pad for just this purpose. When you hear it regularly while braking, it"s 
likely time to bring your car in to a brake specialist for an inspection. When 
brakes are exposed to wet, damp conditions, such as after a rain storm, a 
thin layer of dust can form on the brake pads and cause a very similar 
screeching sound while braking. If a sound disappears after the first few 
times you use your brake, that"s a good indicator that it was just a bit of 
rust built up on the brake pad ant not the brake pad needs to be replaced.
2 - LESS THAN A QUARTER INCH OF BRAKE PAD 
You can also visually inspect your brake pads to know if it"s time to have 
them replaced. Look through your tire spokes and you should see your 
brake pad compressed against your brake rotor. If the pad is less than 1/4 
inch thick(about 3 millimeters) you should consider having your brakes 
inspected, especially if it"s been a long time since your last inspection.
3 - DEEP METALLIC GRINDING AND GROWLING
If you hear a deep, low noise that sounds like metal grinding or a rumbling 
growl, that can be a sign that not only are your brake pads worn away, but 
that your brake discs and calipers are making contact. Since this metal 
contact can very quickly cause even further damage in your braking 
system, you should bring your vehicle in to a service shop as quickly as 
possible if you hear this type of noise.
4- INDICATOR LIGHTS
Some vehicles have an indicator light on the dashboard that will signal 
when it"s time to replace the brake pads. Check your owner"s manual to 
see if your vehicle comes equipped with the low-pad warning system. 
Remember that if the light does come on, you"ll need to have your 
mechanic replace the light sensors as well as the brake pads.
HOW LONG DO BRAKE PADS LAST?
Brake pads are generally thought to be good from anywhere between 
30,000-35,000 miles. However  the real answer to how long brake pads 
can last will vary from vehicle to vehicle and from driver to driver. For 
example, is you tend to drive the most often in urban areas or in heavy 
commuter traffic, you"ll be engaging your brakes a lt more frequently than 
someone who drives in rural lacations or on highways. Some people also 
tend to "ride the brake," meaning they press and depress their brakes 
more habitually than other drivers, causing the brake pads to wear away 
more quickly. With a little attention and forethought, it can be easy to know 
when to replace brake pads on your vehicle.